Safari Van AWD V6-262 4.3L VIN W CPI (1992)
2.
Attach the shim at the top center of the metal liftgate opening flange. The shim should be positioned on the forward side of the flange (Figure 1,
Item A). The shim should be approximately 146 mm x 12.7 mm x 3 mm, made from an ABS material or equivalent, and adhered with 3M
Weatherstrip Adhesive or equivalent.
3.
Reconnect the weatherstrip to the flange using 3M Weatherstrip Adhesive or equivalent.
4.
Reinstall the upper D-ring molding.
To replace garnish molding:
