Safari Van AWD V6-262 4.3L VIN W CPI (1992)
Timing Chain: Service and Repair
Timing Chain and Sprockets
CAMSHAFT REPLACEMENT
Important:
Line up the timing marks on the camshaft sprocket and crankshaft sprocket dot to dot (figure 42). When these marks are lined up dot to dot, the
number four cylinder is at top dead center of its compression stroke. The distributor rotor will need to be positioned facing the number four terminal
on the distributor cap when installed.
Remove
1. Torsional damper.
2. Timing cover.
3. Align the timing marks (figure 42).
4. Camshaft sprocket bolts and nut.
5. Camshaft sprocket, stud, balance shaft drive gear, and timing chain.
-
The sprocket is a light interference fit on the camshaft.
-
Tap the sprocket on its lower edge to loosen it.