gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 7322 > < Diagram Information and Instructions|Page 7319
Page 1
background image

Tail Lamp: Initial Inspection and Diagnostic Overview

1. 

The rear lamp systems (taillamps and license plate lamps), all receive voltage from the same wire circuit BRN (9) and share the same ground
terminals G400 and G401. If only one system is not working, locate and repair open in wiring and/or bulbs that pertain to that system.

2. 

Check condition of STOP-HAZ, PARK LP, and TURN-B/U Fuse(s). If fuse(s) is blown, locate and repair source of overload. Replace fuse.

Initial Inspection and Diagnostic Overview|Page 7322 > < Diagram Information and Instructions|Page 7319