gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Campaign - A/T Dipstick Tube Is Too Short, New Dipstick|Page 3267 > < Campaign - A/T Dipstick Tube Is Too Short, New Dipstick|Page 3265
Page 3
background image

Fluid level indicators required for vehicles in your inventory (stock units), should be obtained from General Motors Service Parts Operation (GMSPO).
To ensure that these parts are obtained as soon as possible, they should be ordered from GMSPO on a C.I.O. order with no special instruction code but
order under advise code (2).

Warranty Information and Identification Label

WARRANTY INFORMATION 
If the customer requests that the dealer install the transmission fluid level indicator or transmission fluid is added, dealers should submit a warranty claim
on each vehicle completed under this campaign.

CAMPAIGN IDENTIFICATION LABEL 
No campaign Identification Label is required for this campaign UNLESS transmission fluid must be added.

Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label."
Each label provides a space to include the campaign number and five (5) digit dealer code of the dealer performing the campaign service. This
information may be inserted with a typewriter or ball point pen.

Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner.

Apply "Campaign Identification Label" only on a clean, dry surface.

ADMINISTRATIVE PROCEDURE 
Procedures covering this campaign are outlined in Section V of your dealership's "GM Truck Claims Processing Manual" # P 9119.

Owner Letter

Dear GMC Truck Owner:

General Motors has determined that certain 1992 M/L vans were built with the transmission dipstick tube assembly shorter than the engineering print
specifications. This condition could cause a properly filled transmission to indicate an overfilled reading on the dipstick. If the transmission were to be
filled to the operating range indicated on the dipstick, transmission slippage (primarily when the transmission fluid is cold), and shortened transmission
life may occur. All of the transmissions were properly filled in production except for a one month period when they were filled to the operating range on

Campaign - A/T Dipstick Tube Is Too Short, New Dipstick|Page 3267 > < Campaign - A/T Dipstick Tube Is Too Short, New Dipstick|Page 3265