gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Knock Sensor > < Initial Inspection and Diagnostic Overview|Page 4057
Page 1
background image

Serial Data: Component Tests and General Diagnostics

A Scan Tool can be connected to the Data Link Connector (DLC). this allows the Scan Tool to communicate with either the Vehicle Control Module (
VCM) or the Brake Pressure Modulator Valve (BPMV). System operations can then be monitored for diagnostic purposes.

There is one Data Line access with a Scan Tool. Terminal PPL (1807) Data Line allows the Vehicle Control Module and the Brake Pressure Modulator
Valve to communicate with each other and/or a Scan Tool.

Knock Sensor > < Initial Inspection and Diagnostic Overview|Page 4057