Safari Van AWD V6-4.3L VIN W (1996)
Distributor: Testing and Inspection
NOTE: Discoloration of the cap and some whitish build up around the cap terminals is normal. Yellowing of the rotor cap, darkening and some carbon
build-up under the rotor segment is normal. Replacement of the cap and rotor is not necessary unless there is a driveability concern.
INSPECT
1. Cap for cracks, tiny holes or carbon tracks between cap terminal traces. Carbon tracks can be diagnosed by using an ohmmeter. With the cap
removed, place one base ohmmeter lead on a cap terminal. Use the other lead to probe all other terminals and the center carbon ball. Move the
base lead to the next terminal and probe all other leads. Continue until all secondary terminals have been tested. If there are any non-infinite
readings, replace the cap.
2. Cap for excessive build up of corrosion on the terminals. Scrape them clean or replace the cap. Some build up is normal.
3. Rotor segment. Replace the rotor if there is excessive wear on the rotor segment or the plastic under the segment or staked post is melted. Some
looseness of the rotor segment is normal if it does not cause performance problems.
4. Shaft for shaft-to.bushing looseness. If the shaft wobbles, replace the housing assembly.
5. Housing for cracks or damage.
