gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Panel Replacement|Page 8938 > < Front Door Hinge|Service and Repair|Page 8933
Page 1
background image

Front Door Panel: Service and Repair
Panel Replacement

Trim Panel Replacement - Door

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

Removal Procedure

1. Remove the screws and the armrest cover (YC5).

2. Remove the window regulator handle, if equipped.

3. Pull out on the lock lever escutcheon, starting with the front edge, in order to remove the lock lever escutcheon.

4. Pull out on the top edge of the escutcheon and pivot down in order to clear the tab at the trim panel and remove the upper corner trim if equipped.
5. Remove the caps that cover the screws retaining the assist handle.
6. Remove the screws that retain the handle to the door.
7. Remove the one screw at the front edge of the accessory switch mount plate.
8. Remove the plate from the trim panel.
9. Disconnect the electrical connectors from the switches on the plate, as needed.

10. Remove the door courtesy lamp from the door panel, if equipped. Refer to Courtesy Lamp/Reflector Replacement - Door   .

Panel Replacement|Page 8938 > < Front Door Hinge|Service and Repair|Page 8933