Safari Van AWD V6-4.3L VIN X (2002)
Upper Side Moulding / Trim: Service and Repair
Cladding Replacement - Left Quarter Panel
Cladding Replacement - Left Quarter Panel
Removal Procedure
1. Remove the wheel opening screws. If the vehicle is equipped with assist steps, the cladding will be shorter across the bottom.
2. Remove the cladding from the rear quarter panel. Refer toCladding Replacement - Adhesive Retained (See: Cladding Replacement - Adhesive
Retained) .
Installation Procedure
1. Install the cladding to the rear quarter panel. Refer to Cladding Replacement - Adhesive Retained (See: Cladding Replacement - Adhesive
Retained) .
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the wheel opening screws.
Tighten the wheel opening screws to 2 N.m (18 lb in).
