gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Compressor Hose Assembly Replacement|Page 7694 > < Compressor Pressure Relief Valve Removal|Page 7689
Page 1
background image

Hose/Line HVAC: Service and Repair
Compressor Hose Assembly Replacement

TOOLS REQUIRED

J 39400-A Halogen Leak Detector

REMOVAL PROCEDURE

1. Disconnect the IAT sensor.
2. Disconnect the MAF sensor.
3. Remove the air cleaner.
4. Recover the refrigerant from the system. Refer to Refrigerant Recovery and Recharging.
5. Remove the grille.
6. Remove the engine cover.
7. Remove the compressor hose assembly bolt (2) from the compressor.
8. Remove the old sealing washers from the compressor.

9. Remove the hose clamp bracket nut (3) from the engine stud.

Compressor Hose Assembly Replacement|Page 7694 > < Compressor Pressure Relief Valve Removal|Page 7689