gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Compressor Hose Assembly Replacement|Page 7720 > < Compressor Hose Assembly Replacement|Page 7718
Page 14
background image

Evaporator Tube Replacement - Auxiliary Rear

TOOLS REQUIRED

J 39400-A Halogen Leak Detector

REMOVAL PROCEDURE

1. Recover the refrigerant from the system. Refer to Refrigerant Recovery and Recharging.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
3. Remove the auxiliary evaporator rear outlet tube from the auxiliary evaporator outlet side tubes.
4. Remove the auxiliary evaporator rear inlet tube from the auxiliary evaporator inlet side tubes.
5. Remove the bolts that retain the clips on the tubes to the body.
6. Remove the nut that retains the tube to the auxiliary evaporator module.

7. Remove the tube from the auxiliary evaporator module.
8. Remove the seal washers

INSTALLATION PROCEDURE

Compressor Hose Assembly Replacement|Page 7720 > < Compressor Hose Assembly Replacement|Page 7718