Safari Van AWD V6-4.3L VIN X (2002)
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the nuts (4) to the A/C refrigerant filter (1).
Tighten
Tighten the nuts to 15 N.m (11 lb ft).
4. Install the evaporator tube.
5. Recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
6. Leak test the fitting(s) of the repaired or reinstalled component using the J 39400-A.
7. Install the grille.
8. Install the upper radiator shroud.
9. Install the air cleaner.
For a description of the RPO Code(s) shown in this article/images refer to the RPO Code List found at Vehicle/Application ID. See: Application and
ID/RPO Codes
Suction Screen Installation
TOOL REQUIRED
J 44551 Suction Screen Installation/ Removal Kit
IMPORTANT: Suction screens are intended to be installed in the suction hose after a major compressor failure.
The suction screens are available in 3 different sizes.
1. Insert the J 44551-5 sizing tool into the suction hose to select the correct size suction screen.
