gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Component Locations|Page 2727 > < Component Locations|Page 2725
Page 1
background image

Ignition Control Module: Description and Operation

IGNITION CONTROL MODULE (ICM) AND IGNITION COILS

The ICM is connected to the PCM by an Ignition Control (IC) circuit. The ICM also has a ground circuit and shares an ignition 1 voltage supply with the
ignition coil. The coil driver in the ICM controls current through the ignition coil based on signal pulses from the PCM. There is no back-up or by-pass
function in the ICM.

Component Locations|Page 2727 > < Component Locations|Page 2725