gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

All Technical Service Bulletins for Drive Belt: > < Valve Clearance Specifications|Page 1402
Page 1
background image

Drive Belt: Customer Interest
A/C - Low Mileage or Compressor Belt Wear

NUMBER:

86-B-90

GROUP:

6B - Cooling

DATE:

June, 1986

SUBJECT:

INCORRECT AIR CONDITIONING COMPRESSOR BELT

MODELS:

1985-86 M VANS EQUIPPED WITH THE 4.3L V6 ENGINE

Some 1985-86 M Vans equipped with the 4.3L V6 engine and air conditioning (A/C) may experience low mileage A/C compressor belt wear. This
condition may be caused by an incorrect belt being installed during production of the vehicle. The incorrect A/C belt (3/8" x 55") has a center cordline
(CCL) too low in the belt cross section which can cause overloading of the belt. Starting with 1986 GMC VIN breakpoint GB 515582, a new A/C belt
(3/8" x 54.5" "High Ride")
which has a higher CCL has been released for production and service use. If this condition is encountered, replace the A/C compressor belt with P/N
469594. Tighten belt to 645 N (145 lb.) using belt tension gauge J-23600-B or BT 33-95-ACBN. Refer to the belt replacement procedures in the Light
Duty Service Manual, Section 6B, Engine Cooling.

All Technical Service Bulletins for Drive Belt: > < Valve Clearance Specifications|Page 1402