gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Recall - Steering Gear Attaching Boss May Break|Page 4794 > < Recall - Steering Gear Attaching Boss May Break
Page 2
background image

GMC Truck General Motors Corporation 
101 Union Street 
Plymouth, Michigan 48170

OWNER NOTIFICATION

Owners will be notified of this campaign on their vehicles by GMC Truck (see copy of Owner Letter included with this bulletin). A listing of owner
names and addresses has been furnished to the involved dealers to enable dealers to follow up with owners involved in this campaign. This listing may
contain owner names and addresses obtained from state motor vehicle registration records. The use of such motor vehicle registration data for any other
purpose is a violation of law in several states. Accordingly, you are urged to limit the use of this listing to this campaign.

Service Procedure

Figure 1 - M-Van Steering Gear Installation

Notice:

Torque valves must be used as specified during reassembly to assure proper retention of these parts.

^

Disconnect negative battery cable.

^

Raise and support vehicle on a hoist.

^

Remove lower mounting ear bolt which attaches the steering gear to the frame rail, Figure No. 1.

^

Thoroughly clean the lower mounting ear of all road dirt and undercoating material using a non petroleum base cleaner such as brake kleener.
Carefully inspect to see if the gear is broken/cracked. Figure No. 1, View A.

^

If the mounting ear is broken/cracked replace with new gear, Part Number 26000502. Refer to the GMC Safari Service Manual, X8530, 3B7-4 for
removal and installation instructions.

Recall - Steering Gear Attaching Boss May Break|Page 4794 > < Recall - Steering Gear Attaching Boss May Break