gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Exterior Trim - Roof Ditch Moldings Loose, Replace|Page 6745 > < Exterior Trim - Roof Ditch Moldings Loose, Replace|Page 6739
Page 1
background image

Unibody: All Technical Service Bulletins
Exterior Trim - Roof Ditch Moldings Loose, Replace

Number: 92-10-161

Section: 10 Body

Date: JULY 1993

Corporate Bulletin No.: 261006

ASE No.:

Subject:
LOOSE ROOF DITCH MOLDINGS

Model and Year:
1985-92 M/L VANS

THIS BULLETIN CANCELS AND SUPERSEDES DEALER SERVICE BULLETIN NO. 92-359-10, DATED JULY 1993. THE ART HAS BEEN
INCLUDED. ALL COPIES OF 92-359-10 SHOULD BE DISCARDED.

CONDITION:
Some 1985-92 M/L vans may exhibit a roof ditch molding that does not remain in the ditch or appears to be distorted.

CAUSE:
This may be caused by poor adhesion, body variation, or shrinking due to exposed sunlight.

CORRECTION:
A redesigned roof ditch molding has been developed that will provide better retention. This new design will use adhesive backed slats, similar to the
luggage slats. These slats will lay inside the ditch and will re-use the existing end caps.

Exterior Trim - Roof Ditch Moldings Loose, Replace|Page 6745 > < Exterior Trim - Roof Ditch Moldings Loose, Replace|Page 6739