Safari Van M V6-262 4.3L VIN W CPI (1992)
Weatherstrip: All Technical Service Bulletins
Doors (Dutch) - Water Entry
BULLETIN NUMBER: 93-10A1-25
SECTION: 10A1
NUMBER: 2
CORPORATE REFERENCE NUMBER: 261007
DATE: November 1992
SUBJECT:
DUTCH DOOR WATER ENTRY (SERVICE PROCEDURES)
MODELS:
1992-93 M/L VANS WITH RPO E54
Owners of some 1992-93 M/L Vans equipped with Dutch Doors may comment on water entry into the rear door area. There are four different water
leaks possible on the new Dutch Door System:
1.
Liftgate hinge/glass leaks
2.
Compression leaks
3.
Carrier leaks
4.
Marriage leaks
Important
Verify that all the body seams on the perimeter of the liftgate frame opening and the vehicle body are properly sealed, especially by the liftgate strut area.
If areas need additional sealing, apply a clear silicone (P/N 1052915 or equivalent) to the exposed areas.
SERVICE PROCEDURE
Liftgate Hinge/Glass Leaks
Water enters into the rear of the vehicle through the liftgate hinge area or around the liftgate glass seal.
