Safari Van M V6-262 4.3L VIN W CPI (1992)
^
Insert J 37828 into the snap ring groove.
Removing The Rotor Pulley
^
Insert J 37827 over the exposed shaft.
^
Align the thumb head bolts of J 8433 to the puller fingers and tighten.
Removing The Rotor Pulley (2 Of 2)
^
Turn the puller center Dolt to the right with a socket wrench until the rotor pulley is free.
7. Field coil (10).
^
Loosen the coil lead wire from the clip on top of the compressor front housing.
Removing The Coil Snap Ring
^
Remove the snap ring (7).
^
Remove the coil.
Install or Connect