Safari Van M V6-262 4.3L VIN W CPI (1992)
Suspension Strut / Shock Absorber: Service and Repair
Rear Suspension
Fig. 7 Shock Absorber Replacement
1.
Raise vehicle and place jackstands under frame side rails.
2.
Position a suitable jack under rear axle housing and raise slightly to support axle assembly.
3.
Disconnect parking brake bracket from right shock absorber.
4.
Disconnect shock absorber from upper mounting, Fig. 7.
5.
Disconnect shock absorber from lower mounting, then remove from vehicle.
6.
Reverse procedure to install. Tighten retaining nuts to specifications.
