gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Campaign - Oil Cooler Outlet Hose Improperly Seated|Page 1638 > < Campaign - Oil Cooler Outlet Hose Improperly Seated
Page 2
background image

DEALER VIN
The specific vehicles involved in this campaign have been identified by Vehicle Identification Number Computer Listings. These listings are furnished to
all involved dealers with the campaign bulletin.

DEALER CAMPAIGN RESPONSIBILITY Dealers are to service all vehicles subject to this campaign at no charge to owners, regardless of mileage,
age of vehicle, or ownership, from this time forward. Dealers are to correct all affected vehicles in new and used vehicle stock prior to their sale.

Whenever a vehicle subject to this campaign is taken into your new or used vehicle inventory, or it is in your dealership for service in the future, you
should take the steps necessary to ensure the campaign correction has been made before reselling or releasing the vehicle.

Owners of vehicles recently sold from your new vehicle inventory are to be contacted by the dealer and arrangements made to make the required cor- 

rection according to instructions contained in this bulletin. If no owner's name and address were available to GMC Truck Division at the time of
campaign initiation, the dealer will determine the owner's name and address from the dealership sales records. Please provide this information directly on
the second copy of the listing next to the applicable VIN so that our records may be updated and the appropriate notification mailed to the owner. This
second copy should then be submitted to the address listed below in the previously supplied yellow campaign envelopes.

GMC Truck Division General Motors Corporation 101 Union Street Plymouth, Michigan 48170

OWNER NOTIFICATION

Owners will be notified of this campaign on their vehicles by GMC Truck Division (see copy of owner letter included with this bulletin). A listing of
owner names and addresses has been furnished to the involved dealers to enable dealers to follow up with owners involved in this campaign. This listing
may contain owner names and addresses obtained from State Motor Vehicle Registration records. The use of such motor vehicle registration data for any
other purpose is a violation of law in several states. Accordingly, you are urged to limit the use of this listing to this campaign.

Service Procedure

1.

Raise vehicle up on hoist.

2.

Depress locking tabs on plastic snap-in connector on oil cooler outlet hose and pipe assembly.

3.

Brace pipe assembly with one hand to prevent bending or damage and pull hose assembly off of snap-in connector with other hand. Some leakage

Campaign - Oil Cooler Outlet Hose Improperly Seated|Page 1638 > < Campaign - Oil Cooler Outlet Hose Improperly Seated