gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Campaign - Oil Cooler Outlet Hose Improperly Seated|Page 1630 > < Campaign - Oil Cooler Outlet Hose Improperly Seated|Page 1628
Page 3
background image

will occur, but it will be minor.

4.

Snap in connector will come out with the pipe assembly. Check snap-in connector and Oring inside of hose assembly for damage. If no damage is
evident, lube male tube end surface, up to the head, with engine oil and snap the connector onto the pipe tube and making sure it is properly seated
before reconnecting pipe and hose assembly, being sure that pipe is securely snapped inside of hose assembly.

5.

If snap-in connector or O-ring are damaged, the hose assembly must be replaced. The snap-in connector is part of the hose assembly and comes
inserted in the hose connector

6.

Start engine and check hose connection for leakage.

7.

Install "Campaign Identification Label."

Parts, Warranty & Label Information

PARTS INFORMATION Parts are to be obtained from General Motors Service Parts Operation (GMSPO). To ensure that these parts will be obtained
as soon as possible, they should be ordered from GMSPO on a C.I.O. order with no special instruction code but order under an advise code (2).
Experience has indicated there have been no hose failures. Therefore, it is estimated that the possibility of vehicles requiring hose assembly or pipe
replacements is extremely remote.

WARRANTY INFORMATION Dealers should submit a warranty claim on each vehicle completed under this campaign.
CAMPAIGN IDENTIFICATION LABEL Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will
require a "Campaign Identification Label." Each label provides a space to include the campaign number and five (5) digit dealer code of the dealer
performing the campaign service. This information may be inserted with a typewriter or ball point pen.

Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner

Apply "Campaign Identification Label" only on a clean, dry surface.

ADMINISTRATIVE PROCEDURE Procedures covering this campaign are outlined in Section V of your dealership's "GM Truck Claims Processing
Manual" # P8919.

Owner Letter

Campaign - Oil Cooler Outlet Hose Improperly Seated|Page 1630 > < Campaign - Oil Cooler Outlet Hose Improperly Seated|Page 1628