Safari Van M V6-262 4.3L VIN Z TBI (1990)
Oil Pan: Service and Repair
1.
Disconnect battery ground cable.
2.
Raise and support vehicle.
3.
Drain engine oil, then disconnect exhaust pipes from exhaust manifolds.
4.
Disconnect engine struts from flywheel cover, then remove flywheel cover.
5.
Disconnect starter motor and position aside.
6.
Remove oil pan attaching bolts, nuts and reinforcements.
7.
Remove oil pan and gasket.
8.
Reverse procedure to install. Apply suitable sealant to front cover to block joints and to rear crankshaft seal to block joints. Tighten oil pan nuts
and bolts to specifications.
