Safari Van M V6-262 4.3L VIN Z TBI (1990)
REMOVAL AND REPLACEMENT PROCEDURE:
(Refer to Figure 1.)
1.
Note radio pre-set stations.
2.
Disconnect the battery ground cable from the battery.
3.
Disconnect the horn lead connectors from each horn assembly.
4.
Remove the horn retaining screws.
5.
Remove and discard the horn assemblies.
6.
Install new horn assemblies P/N 10456444-RH "A" note and P/N 10456443-LH "F" note using retaining screws previously removed. Torque
screws to 14-20 N-m (10.32-14.75 lbs.ft.).
7.
Reconnect the horn lead connectors to the horns.
8.
Reconnect the battery ground cable to the battery.
9.
Re-program radio to pre-set stations and set time where required.
SERVICE PARTS INFORMATION:
Parts are currently available from GMSPO.
