gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Cruise Control - Works Intermittently|Page 7868 > < Lighting - Exterior Lamp Condensation and Replacement|Page 7862
Page 1
background image

Combination Switch: Technical Service Bulletins
Cruise Control - Works Intermittently

GMC NUMBER: 92-8A-89

GROUP: 8A Cab Electrical

DATE: May 1992

CORPORATE
NUMBER: 268102

SUBJECT:
CRUISE CONTROL WORKS INTERMITTENTLY

MODELS:
1985-92 M/L VEHICLES OR 1986-92 S/T VEHICLES WITH CRUISE CONTROL (RPO K34)

Some owners of 1985-92 M/L vehicles or 1986-92 S/T vehicles with cruise control (RPO K34) may comment that their cruise control operates
intermittently. This condition may be caused by the wires becoming pinched as they exit the multi-functional lever. These wires may ground out on the
lever rod and short the cruise function. To correct this condition in production, the wiring harness that exits the lever has been rerouted and the opening
in the multi-functional lever has been redesigned to allow the wires more clearance. The diagnostic procedures in the applicable Service Manual should
be followed before replacing the multi-functional lever. If the multi-functional lever requires replacement, the following procedure should be performed:

SERVICE PROCEDURE

1.

Disconnect the wire harness connector.

2.

Remove the harness protector cover.

3.

Attach a long piece of mechanic's wire to the end of the harness connector.

4.

Remove the multi-functional lever from the turn signal switch.

5.

Gently pull the harness up and out so the mechanic's wire can be used to install the new unit.

6.

Attach the upper end of the mechanic's wire to the harness connector. Gently pull the mechanic's wire at the lower end of the column, feeding the
harness into the proper location in the column.

7.

Install a redesigned multi-functional lever (P/N 25111290) into the turn signal switch.

8.

Disconnect the mechanic's wire from the harness connector.

9.

Install the harness protector cover.

10.

Reconnect the wire harness connector.

SERVICE PARTS INFORMATION

Part Number

Descrption

25111290

Multi-functional Lever

Important

The new Part Number (P/N 25111290) should be used when correcting this conditon in the above listed vehicles.

Cruise Control - Works Intermittently|Page 7868 > < Lighting - Exterior Lamp Condensation and Replacement|Page 7862