Safari Van M V6-262 4.3L VIN Z TBI (1990)
Fuel Pump Relay: Description and Operation
Mounted To Right Side Engine Compartment
When the key is first turned ON, without the engine running, the ECM will turn the fuel pump relay ON for two seconds. This builds up the fuel
pressure to normal operating pressure. If the engine is not started within two seconds, the ECM will shut the fuel pump OFF and wait until ignition
reference pulses are present. As soon as the engine is cranked, the ECM turns the relay ON, which powers the fuel pump. The ECM continues to power
the fuel pump during engine operation. If the fuel pump relay fails, it is backed up by the oil pressure switch, which continues to operate the fuel pump as
long as oil pressure remains above 28.0 kPa (4 psi).
-
A faulty fuel pump relay can result in long cranking times, particularly if the engine is cold.
-
An inoperative fuel pump would cause a no start condition. A fuel pump which does not provide enough pressure can result in poor performance.
