Safari Van M V6-262 4.3L VIN Z TBI (1990)
Power Steering Pump: Service and Repair
Removal/Installation
1.
Disconnect battery ground cable, then place suitable drain pan under pump.
2.
Loosen belt tensioner, then remove belt.
3.
On 4.3L/V6-262 engines, remove rear brace attaching nuts, then the rear brace.
4.
On all models, remove pulley, using puller J-29785-A or equivalent.
5.
Disconnect and cap pressure and return hoses.
6.
Remove pump attaching bolts, then the pump.
7.
Reverse procedure to install. Tighten mounting bolts to specifications. If equipped with a 4.3L/V6-262 engine, tighten rear brace-to-stud nut and
the brace-to-pump nut to specifications.