gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

A/T - New Low and Reverse Clutch and Plate Dimensions|Page 3304 > < A/T - 4L60 New 3-4 Clutch Plates Available
Page 1
background image

Clutch: All Technical Service Bulletins
A/T - New Low and Reverse Clutch and Plate Dimensions

GMC NUMBER:

90-7A-54

GROUP:

7A Manual Transmission

DATE:

April, 1990

CORPORATE
NUMBER:

077107R

SUBJECT:

NEW LOW AND REVERSE CLUTCH SUPPORT AND SELECTIVE PLATE DIMENSIONS

MODELS:

ALL 1990 TRUCKS AND VANS W/4L60 (700-R4)

BULLETIN COVERS:
A dimensional change in the low and reverse clutch support and its selective plates. The thickness of the low and reverse clutch support has increased
while the thickness of the selective plates has decreased. Three selective plates are available.

Figure 1 - THM 700-R4/HYDRA-MATIC 4L60 Transmission Identification Information

DATE OF PRODUCTION CHANGE:
(See Figure 1)

Production changes occurred in two phases which are shown below.

Figure 2 - Measuring Low And Reverse Clutch Support

A/T - New Low and Reverse Clutch and Plate Dimensions|Page 3304 > < A/T - 4L60 New 3-4 Clutch Plates Available