Safari Van M V6-262 4.3L VIN Z TBI (1990)
SERVICE INFORMATION:
In most cases, the new low and reverse clutch assembly will only require a fifth reaction plate instead of a selective plate. The only way to identify the
new low and reverse clutch support is to measure its thickness with a micrometer (See Figure 2).
The new low and reverse clutch support and selective plates may be used to service some past model year transmissions if the transmission was built
after February 9, 1987 (Julian Date 040).
NOTICE:
The SELECTIVE PLATES are not interchangeable between the previous clutch support and the new clutch support. If selective plates are
installed in the wrong clutch assembly, durability of the low and reverse clutch will be reduced.
SERVICE MANUAL REFERENCE:
Refer to the HYDRA-MATIC 4L60/THM 700-R4 Automatic Transmission Unit Repair section of the
appropriate Service Manual for removal and installation information.
