gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Lock Cylinder Switch > < Battery Replacement|Page 10682
Page 1
background image

Keyless Entry Transmitter Battery: Service and Repair
Resynchronization

Resynchronization may be necessary due to the security method that the remote keyless entry system uses. The transmitter does not send the same signal
twice to the receiver. The receiver will not respond to a signal that has been sent previously. This prevents anyone from recording and playing back the
signal from the transmitter.

Resynchronization may be necessary under the following conditions:

^

The transmitter battery is changed

^

The vehicle battery is disconnected

^

The transmitter buttons are pushed 256 time out of range of the receiver

In order to resynchronize the transmitter with the receiver, stand close to the vehicle and simultaneously press and hold the LOCK and UNLOCK buttons
on the transmitter for 7 seconds. The door locks should cycle in order to confirm resynchronization.

Lock Cylinder Switch > < Battery Replacement|Page 10682