gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Front Doors|Page 11269 > < Front Doors|Page 11267
Page 2
background image

1. Lock to the door.
2. Screws retaining the lock to the door.

^

Tighten Screws to 10 Nm (89 lb. in.)

3. Electrical connectors to the lock.
4. Lock rods to the lock.
5. Door trim panel.

Lock Cylinder

Remove or Disconnect

1. Right Side rear door trim panel.
2. Outside handle.
3. Clip retaining the lock cylinder lever to the lock cylinder.
4. Press lock cylinder retainer and remove lock cylinder from the handle.

Install or Connect

Front Doors|Page 11269 > < Front Doors|Page 11267