Savana 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
1. Install the front brake pipe to the vehicle.
2. Install the retaining clips of the brake pipe to the frame.
3. Connect the brake pipe to the EBCM unit.
^
Tighten the front brake pipe to the EBCM unit to 20 Nm (15 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Connect the front brake pipe to the front brake hose.
^
Tighten the front brake pipe to the front brake hose to 20 Nm (15 ft. lbs.).
5. Bleed the brake hydraulic system. Refer to Hydraulic Brake System Bleeding (Manual Bleeding) or Hydraulic Brake System Bleeding (Pressure
Bleeding).
