Savana 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
5. Install the parking brake release handle and the cable. Refer to Park Brake Release Handle Replacement in Park Brake.
6. Connect the front parking brake cable to the rear parking brake cables.
7. Remove the pin from the parking brake lever.
8. Move the parking brake lever to the FULL up position.
9. Measure the threads on the equalizer. Adjust the threads to the following specifications:
^
Passenger/Cargo to 13 mm (0.511 in)
^
Cutaway/Uplifters to 21 mm (0.826 in)
10. Verify that the vehicle will hold position with the brake lever depressed.
11. If additional adjustments need to be made, refer to Park Brake Cable Service/Adjustment in Park Brake.
