Savana 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
Parking Brake Cable: Service and Repair
Park Brake Cable Replacement (Rear Cables)
REMOVAL PROCEDURE
1. Complete the parking brake lever pin up procedure. Refer to Enabling the Park Brake Automatic Adjuster in Park Brake.
2. Loosen the parking brake cable at the cable adjuster.
3. Disconnect the front parking brake cable from the rear parking brake cables.
4. Remove the rear brake shoes from the backing plate. Refer to Brake Backing Plate Replacement in Drum Brakes.
5. Disconnect the rear parking brake cable from the backing plate retainer.
6. Remove the rear parking brake cable from the vehicle.
INSTALLATION PROCEDURE
1. Install the rear parking brake cable to the vehicle.
