Savana 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
6. Remove the retaining nuts from the power brake booster.
7. Remove the power brake booster from the vehicle.
8. Remove the power brake booster gasket.
INSTALLATION PROCEDURE
1. Install the power brake booster gasket.
2. Install the power brake booster to the vehicle.
3. Install the retaining nuts to the power brake booster.
^
Tighten the retaining nuts to 36 Nm (27 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Remove the power brake booster pushrod.
5. Connect the inlet hose to the power brake booster.
