Savana 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
1. Disconnect the negative battery cable.
CAUTION: Before removing or installing any electrical unit or when a tool or equipment could easily come in contact with "live"
exposed electrical terminals, disconnect the negative battery cable to help prevent personal injury and/or damage to the vehicle or
components. Unless instructed otherwise, the ignition switch must be in the "OFF" or "LOCK" position.
2. Remove the retainers from the alarm or module.
3. Disconnect the electrical connectors.
4. Remove the alarm or module from the vehicle.
INSTALLATION PROCEDURE
1. Install the alarm or module to the vehicle.
2. Connect the electrical connectors.
3. Install the retainers to the alarm or module.
4. Connect the negative battery cable.
CAUTION: Before removing or installing any electrical unit or when a tool or equipment could easily come in contact with "live"
exposed electrical terminals, disconnect the negative battery cable to help prevent personal injury and/or damage to the vehicle or
components. Unless instructed otherwise, the ignition switch must be in the "OFF" or "LOCK" position.
Brake Booster Push Rod Gauging Procedure
