Savana 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
Drive Belt Tensioner: Testing and Inspection
1. Remove the drive belt.
NOTICE: Allowing the drive belt tensioner to snap into the free position may result in damage to the tensioner.
2. Position a hex-head socket on the belt tensioner pulley bolt head.
3. Move the drive belt tensioner through it's full travel.
^
The movement should feel smooth.
^
There should be no binding.
^
The tensioner should return freely.
4. If any binding is observed, replace the tensioner.
5. Install the drive belt.
