Savana 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
A/C Coupler O-ring: Service and Repair
^
When installing the sealing washers, keep the dirt and foreign material from getting on the sealing surfaces of the washers, hose block or
compressor ports. Clean all sealing surfaces with a lint-free rag.
^
Do not reuse the sealing washer.
^
Sealing washers do not have to be oiled prior to assembly.
1. Install sealing washer onto pilots of suction/discharge block fitting. Washers must "Bottom" against surface of block fitting.
2. Install the hose block to the compressor making sure the sealing washers are seated within the compressor machined surfaces.
3. Hold the block in place and hand tighten attachment bolt.
Tighten
^
Bolt to 35 N.m (26 lb ft).
