Savana 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
Description
1. Install the inflatable restraint IP module (3) to the IP carrier (1).
2. Install the inflatable restraint IP module mounting fasteners (2).
Tighten
Tighten fasteners to 10 N.m (89 lb. in). Refer to Fastener Notice in Vehicle Damage Warnings.
3. Connect the inflatable restraint IP module pigtail connector.
4. Install the Connector Position Assurance (CPA) to the inflatable restraint IP module harness connector.
5. Install the passenger knee bolster.
6. Enable the SIR system.
W/O Passenger SIR
Description
1. Install the inflatable restraint IP trim cover (2)10 the IP carrier (1).
2. Install the inflatable restraint IP trim cover mounting fasteners (3).
Tighten
Tighten fasteners to 10 N.m (89 lb. in). Refer to Fastener Notice in Vehicle Damage Warnings.
3. Connect the inflatable restraint IP trim cover pigtail connector.
4. Install the Connector Position Assurance (CPA) to the inflatable restraint IP trim cover harness connector.
5. Install the passenger knee bolster.
6. Enable the SIR system.
Important Preliminary Precautions
CAUTION: When you are carrying an undeployed inflator module:
^
Do not carry the inflator module by the wires or connector on the inflator module
^
Make sure the bag opening points away from you
When you are storing an undeployed inflator module, make sure the bag opening points away from the surface on which the inflator module
rests. When you are storing a steering column, do not rest the column with the bag opening facing down and the column vertical. Provide free
space for the air bag to expand in case of an accidental deployment. Otherwise, personal injury may result.
