gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Starter Motor Replacement|Page 8949 > < Diagram Information and Instructions|Page 8946
Page 1
background image

Starter Motor: Service and Repair
Starter Motor Replacement

REMOVAL PROCEDURE  

1. Disconnect the battery negative cable.
2. Remove the starter motor brackets and shields, if equipped.

3. Disconnect the wires from the starter solenoid.

4. Remove the bolts and the shims (if present) from the starter motor.
5. Remove the starter motor from the engine.

INSTALLATION PROCEDURE  

Starter Motor Replacement|Page 8949 > < Diagram Information and Instructions|Page 8946