Savana 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
^
Notch in stub shaft cap must fully engage valve body pin and seat against valve body shoulder.
^
Install O-ring seals (45) and teflon rings (46) to valve body (43).
^
Lubricate O-ring seals (45) and teflon rings (46) with power steering fluid.
3. Stub shaft (40) and valve assembly to worm shaft (13), fitting pin on worm shaft (13) to slot in the valve assembly.
4. Thrust support assembly.
Adjust
^
Thrust bearing preload and pitman shaft over center sector.
INSTALL OR CONNECT
^
Steering gear.
Rack Piston and Worm Shaft Replacement