Savana 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
Suspension Travel Bumper: Service and Repair
Rear Axle Bumpers
REMOVAL PROCEDURE
Remove the rear axle bumper from the frame bracket as follows:
1. Lift upward on the front side of the bumper.
2. Slide the bumper forward in order to free the bumper from the bracket.
INSTALLATION PROCEDURE
Install the bumper to the frame bracket as follows:
1. Slide the bumper rearward.
2. Ensure that the bumper is seated into the bracket.
