Savana 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
Automatic Transmission Dipstick - Dipstick Tube: Service and Repair
4L80-E Automatic Transmission
REMOVAL PROCEDURE
1. Remove the engine air cleaner.
2. Remove the transmission fluid level indicator fro the fluid fill tube.
3. 6.5L Diesel Engine: Remove the bolt and the nut securing the transmission fluid fill tube to the engine.
4. 7.4L Engine: Remove the nut securing the transmission fluid fill tube to the transmission stud.
5. Raise the vehicle.
6. Support the vehicle with safety stands.
7. Remove any dirt from the transmission where the fluid fill tube enters the transmission case.
8. Remove the transmission fluid fill tube from the transmission. Pull the tube upward from the transmission.
9. Remove the transmission fill tube seal.
10. Clean the metal parts using solvent. Do not allow the solvent to enter the transmission.
11. Air dry the parts.
INSTALLATION PROCEDURE
