gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Automatic Transmission Dipstick - Dipstick Tube|Specifications > < A/T - 4L80E Engine Stalls and/or Surges at Stop
Page 1
background image

Automatic Transmission Dipstick - Dipstick Tube: Technical Service Bulletins
A/T - Proper Fill Tube & Bottom Pan Combination

File In Section: 7 - Transmission

Bulletin No.: 77-71-74

Date: January, 1998

INFORMATION

Subject: 
Information - Proper Fill Tube and Bottom Pan Combination for SRTA/Goodwrench

Models: 
1998 Chevrolet and GMC C/K, G Models with HYDRA-MATIC 4L60-E (RPO M30)

Some vehicles were built with a 1998 START OF PRODUCTION TRANSMISSION that had a "regular" bottom pan.

On October 1, 1997 (Julian Date 274), a new "deep" bottom pan (17 mm deeper) was implemented which requires a new fill tube.

Any vehicle with the "regular" bottom pan that requires a replacement transmission assembly (SRTA) must be fitted with a new fill tube which is 14 mm
shorter (P/N 15732100-C/K Models/ 15150125-G Models).

Order a new fill tube it you have an early 1998 Transmission Assembly that needs to be replaced.

Reuse the current fluid level indicator (dipstick).

Parts Information

Requires fill tube - P/N 15732100-C/K Model/ 15150125-G Models

Parts are currently available from GMSPO.

Refer to your Service Manual for proper fill tube replacement procedures.

Automatic Transmission Dipstick - Dipstick Tube|Specifications > < A/T - 4L80E Engine Stalls and/or Surges at Stop