Savana 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
^
The actuator
^
Inspect the above components for the following items.
^
Damage
^
Damaged flats or threads
^
Distortion
^
Proper fit
^
Cracks
^
Burrs
INSTALLATION PROCEDURE
1. Install the pawl shaft.
2. Install the parking pawl.
3. Install the plug using a 5/16 inch rod with Loctite or the equivalent.
4. Install the retainer.
5. Install the pawl return spring.
6. Install the detent lever to the actuator assembly.
7. Install actuator assembly over the parking pawl.
8. Install the seal and the manual shaft.
9. Install the nut on the shaft.
10. Install the roll pin.
11. Install the parking lock bracket with the two bolts.
^
Tighten the bolts to 24 Nm (18 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
12. Install the oil pan and filter.
