Savana 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
The one-piece propeller shaft has an orange arrow on the identification label (1) which indicates the low point of the small residual imbalance that still
remains after balancing the shaft within its specified tolerance.
The two-piece propeller shaft has an orange dot on or near the pinion flange which indicates the low point of imbalance (2). However this dot may be
faded, and you must reference mark the relationship of the components before removal.
An orange dot also is on or near the pinion flange of the rear axle. The pinion flange of the rear axle may also have a stamped X at the same location
which indicates the high point of residual imbalance. You must align the orange arrow or dot on the propeller shaft as closely as possible with the
orange dot or X on the rear axle in order to offset the residual imbalances and produce the smoothest possible driveline.
