Savana 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
Axle Shaft Assembly: Service and Repair
Axle Shaft, Oil Seal & Bearing Replacement (8 5/8 & 9 1/2 Inch)
REMOVAL PROCEDURE
^
Tools Required
-
J2619-01
-
J8092
-
J21128
-
J23689
-
J23690
-
J29709
-
J29712
-
J29713
IMPORTANT: Observe and accurately mark the positions of all driveline components relative to the propeller shaft and axles prior to disassembly.
These components include the propeller shaft, drive axles, pinion flanges, output shafts, etc. Reassemble all components in the exact relationship the
components had to each other during removal. Follow specifications and torque values. Follow any measurements made prior to disassembly.
1. Raise and support the vehicle on a hoist and support with safety stands.
CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.
2. Remove the wheel and tire assembly.
3. Remove the rear brake drum.
4. Remove the axle carrier cover.
5. Remove the pinion shaft screw from the differential case.
6. On axles without a locking differential, remove the pinion shaft.
