Savana 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
Seals and Gaskets: Service and Repair
Oil Seal and/or Bearing Replacement
REMOVAL PROCEDURE
^
Tools Required
-
J2619-01 Driver Handle.
-
J23690 Axle Shaft Bearing Installer.
-
J29709 Axle Shaft Bearing Installer
-
J21128 Axle Shaft and Pinion Seal Installer.
-
J29713 Axle Shaft Bearing Installer (9 1/2 in ring gear)
1. Raise the vehicle on a hoist.
2. Remove the wheel and tire assembly.
3. Remove the brake drum (6).
4. Clean the dirt from the carrier cover (4) and surrounding area.
5. Remove the carrier cover bolts (3) and clips.
6. Remove the carrier cover (4) from the housing (2).
^
Catch the oil in a drain pan
^
Remove any gasket material
7. Remove the screw.
