Savana 1/2 Ton Van V8-5.3L VIN T (2003)
Tie Down Hook / Bracket: Service and Repair
Tie-Down Bracket Replacement - Rear
Tie-Down Bracket Replacement - Rear
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the tow hooks to the frame mounting nuts.
3. Remove the tow hook from the frame.
4. Remove the tow hook bolts from the frame.
Installation Procedure
1. Install the tie down bracket bolts to the frame.
2. Install the tie down bracket to the frame.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the tie down bracket to the frame mounting nuts.
Tighten the nuts to 88 N.m (65 lb ft).
4. Lower the vehicle.
