Savana 1/2 Ton Van V8-5.3L VIN T (2003)
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the fan shroud bolts (1) to the top of the radiator support.
^
Tighten the bolts to 6 Nm (53 inch lbs.).
4. Install the fan shroud bolts (3) to the sides of the fan shroud.
^
Tighten the bolts to 6 Nm (53 inch lbs.).
5. Install the engine oil cooler lines.
6. Install the automatic transmission oil cooler lines.
7. Install the radiator outlet hose (4) to the radiator.
8. Install the radiator outlet clamp to the radiator outlet using the J 38185.
9. Install the radiator inlet hose (5) to the radiator.
10. Install the hose clamp at the radiator inlet housing using the J 38185.
11. Install the outlet heater hose (2).
12. Install the outlet heater hose clamp using the J 39529.
13. Install the coolant recovery reservoir.
14. Inspect the automatic transmission fluid level.
15. Inspect the engine oil level.
