Savana 1/2 Ton Van V8-5.3L VIN T (2003)
2. Install the water pump bolts.
2.1.
Tighten the water pump bolts a first pass to 15 Nm (11 ft. lbs.).
2.2.
Tighten the water pump bolts a final pass to 30 Nm (22 ft. lbs.).
3. Install the heater inlet hose to the water pump.
4. Position the heater inlet hose clamp at the water pump.
5. Install the outlet hose to the water pump.
6. Position the outlet hose clamp at the water pump.
7. Install the inlet hose to the water pump.
8. Position the inlet hose clamp at the water pump.
9. Install the accessory drive belt tensioner and bolts to the engine.