Savana 1/2 Ton Van V8-5.3L VIN T (2003)
6. Remove the front engine mount to the engine mounting bolts through the wheelwell.
7. Remove the rear engine mount to the engine mounting bolts from under the vehicle.
8. Remove the engine mount from the vehicle.
Installation Procedure
1. Install the engine mount to the vehicle.
2. Install the rear engine mount to the engine mounting bolts from under the vehicle. DO not tighten at this time.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the front engine mount to the engine mounting bolts through the wheelwell.
-
Tighten the engine mount to engine mounting bolts to 50 Nm (37 ft. lbs.)
4. Lower the engine.